In an effort to get better results with my on-location, outdoor shoots using flash I had to do some extra research to help me understand what it really means about strobes being controlled by aperture and ambient light controlled by shutter speed and how to effectively use flash photography outdoors during daylight hours. I recommend reading the entire article here but I will highlight the points that I found very informative.
An Introduction to Outdoor Flash Photography
If you're like me and knew so little about the field of photography, the challenges these classes offer to get us real-world experience should be accepted as a means to acquire or hone our skills. Many of these assignments will provide us opportunities to venture out of the studio where we face even more elements for consideration. Good time management is very important as well as understanding your environment. The studio gives us greater control but how do you set up your strobes during the day..? Using ambient light and likely a reflector card would be the first go-to, maybe even a speedlight, when shooting outdoors during the day, but effectively using flash photography outdoors can be both an invaluable skill and fun to experiment with. This Nature photographer here cannot resist the urge to be shooting outside so it was important for me to learn how to be able to combine the two for portraiture -- Double bonus!
The first problem we face is balancing the mixed light. You have natural ambient light and flash to consider so make time to do a custom white balance using your gray card.
Next, since we cannot control the sun we can effectively control the strobes to light the scene. It is often noted that we should avoid shooting when the sun is high but rather shoot early or shoot around sunset. Sometimes we cannot avoid it so the best approach when using strobes is to first set the exposure on your camera to match the available light. You will need to keep an eye on your shutter speed so that you are metering for an exposure that is within your sync speed. This will help you determine the aperture at which to meter your strobes. It is important to take test shots beforehand to obtain the correct exposure balance before you start shooting because natural ambient light can change pretty fast. You will also need to determine the quality of light you want to create by using modifiers appropriately and also getting creative with how you use them such as for bouncing light for use as fill light as you will see later when discussing cross lighting.
Something to consider about light placement is outdoor cross-lighting. This is where the lights face the direction of the sun and the model is captured in between--something comparable to shooting under the mid-day sun with no shade. It is highly recommended to have the sun illuminating your subject and your strobes fill their shadowed side or you will end up running into issues with them squinting. Follow the same instructions for metering and checking the desired exposure.
These tips will help you achieve more effective outdoor lighting and increased success when using your strobes outside. As with pretty much everything we learn, practice does indeed make perfect and hard work almost always pays off. Let your passion and curiosity inspire you to be the best photographer you can be. Do you have tips about flash photography outside or questions I might be able to answer? Please leave a comment below!
Works Cited
Eftaiha, Diana. "An Introduction to Outdoor Flash Photography." photography.tutsplus. Envato Pty Ltd., 15 Dec. 2010. Web. 8 Aug. 2014. <http://photography.tutsplus.com/articles/an-introduction-to-outdoor-flash-photography--photo-4272>
All images are my own and from my recent experiences using my strobes during the day.
No comments:
Post a Comment
Please feel free to comment and ask questions we are here to help!